I had an apostrophe (lightnin' struck my brain...) about what to do with this rope. Stay tuned over the next few weeks and maybe you'll see it pan out.
Anonymous said…
This is pretty cool.
Any pointers to plans for the twister and spreader you show in the video? The wooden one?
Try this for instructions on the process in general: http://www.motherearthnews.com/Do-It-Yourself/1976-11-01/The-Incredible-Rope-Making-Machine.aspx
You can find plans for a planetary gear system ropemaker here: http://www.mkdrafting.com/ropepics.html
And although it doesn't have plans per se, this thread has a lot of photos and drawings of different ropemaking devices: http://igkt.net/sm/index.php?topic=491.0
I have been making rope from plastic bags and I found a way to make it go much quicker and the plastic is WAY stronger. Those bags are designed to have their strength running vertically, not horizontally. So, to take advantage of that, lay the bag flat, tucking in the sides of the bag where the creases are. Then, cut each side off the bag so that you have the handle and the bottom seam on each end. By cutting about an inch and a half in from the sides you will create a loop that is VERY strong. You put these loops together with what amounts to a square knot. You get about 3 feet worth per bag. Even if you just go twice around the rope machine hooks so you have two strands per hook, you will get a rope about 5/16" thick and it is strong. I have used it to tie down mattress and box springs in my truck and tie down stuff to haul to the dump. I use the trucker's hitch which has a 2:1 pulling ratio. 40 bags will get you about 20 feet of good rope. I overtightened mine, however, and it ended up like a lariat rope...pretty stiff (but very usable). Just thought I would pass that along. I'm on the ropemaking yahoo group.
Comments
What are you going to use your rope for?
Still, that's really impressive, Brig!
Any pointers to plans for the twister and spreader you show in the video? The wooden one?
Thanks.
You can find plans for a planetary gear system ropemaker here: http://www.mkdrafting.com/ropepics.html
And although it doesn't have plans per se, this thread has a lot of photos and drawings of different ropemaking devices: http://igkt.net/sm/index.php?topic=491.0